{
  "source": "built-in",
  "visibility": "public",
  "listed": true,
  "version": "1.0.0",
  "docsUrl": "https://developers.alyt.com/connectors/zigbee",
  "kind": "ZIGBEE",
  "name": "Zigbee",
  "icon": "radio",
  "promise": "Zigbee bulbs, plugs, meters and sensors from any brand, joined to ALYT's own network. No cloud, no app.",
  "connectivity": "local",
  "brings": [
    "light",
    "switch",
    "sensor"
  ],
  "connect": {
    "method": "discover",
    "fields": [],
    "help": "Nothing to type: looking for devices opens the network for two minutes. Put a device in pairing mode and it joins."
  },
  "discovery": {
    "verb": "Let devices join"
  },
  "pairing": {
    "joinSeconds": 120,
    "intro": "The network is open to new devices while this is up. Pick the brand, reset the device if it belonged to another hub, and it appears below as it joins.",
    "supported": true,
    "vendors": [
      {
        "id": "philips-hue",
        "name": "Philips Hue",
        "devices": "White, White Ambiance and White and Colour bulbs, spots and light strips",
        "matchVendors": [
          "Philips"
        ],
        "fresh": "New bulb, never on a hub? Just power it while this is open: it shows up under Joining now by itself within a minute, nothing to press.",
        "reset": [
          "Type the 6-character code printed on the bulb below and press Reset. Keep the bulb powered; it blinks once it is reset.",
          "If it does not blink: with the bulb on, switch it off for 2 seconds and on for 8 seconds, five times in a row. It pulses when reset.",
          "With a Hue dimmer switch: hold it near the bulb and press I and O together for 10 to 12 seconds until the bulb flashes.",
          "Or delete it from the hub it belongs to: in the Alexa app, Devices, the bulb, the bin icon; in the Hue app, remove the light."
        ],
        "pair": [
          "Leave the bulb powered on. A reset bulb joins on its own within a minute while the network is open.",
          "It appears below as a Philips light. Give it a room."
        ],
        "note": "A bulb that is on another hub (an Echo, a Hue Bridge) stays there until it is reset; only then can it join.",
        "actions": [
          {
            "id": "reset-by-serial",
            "label": "Reset a bulb by its code",
            "help": "The 6 characters printed on the bulb, such as 3A745C. Several bulbs: separate the codes with commas.",
            "fields": [
              {
                "key": "serial",
                "label": "Code on the bulb",
                "kind": "text",
                "secret": false,
                "required": true,
                "placeholder": "3A745C"
              }
            ],
            "done": "The reset was sent. The bulb blinks and joins within a minute."
          }
        ],
        "source": {
          "url": "https://www.zigbee2mqtt.io/devices/9290012573A.html",
          "verifiedAt": "2026-09-04"
        }
      },
      {
        "id": "kwikset",
        "name": "Kwikset SmartCode",
        "devices": "SmartCode 910 and 912, the traditional deadbolts and the conversion kits, with Zigbee",
        "matchVendors": [
          "Kwikset"
        ],
        "fresh": "New lock, never on a hub? Skip the reset: pair it as below, and it shows up under Joining now by itself.",
        "reset": [
          "Remove the battery pack.",
          "Hold the Program button under the battery cover while you put the pack back, and keep holding for about 30 seconds, until the lock beeps and the LED flashes red.",
          "Press the Program button once more. The LED flashes green and red; on the 888, green with one beep."
        ],
        "pair": [
          "Open the door and keep it open.",
          "While the network is open, press button A on the inside of the lock: four times in a row on the 910, once on the 914 and 916.",
          "The LED blinks while it joins; the lock appears below within a minute."
        ],
        "note": "The 916 touchscreen is not on zigbee2mqtt's list yet: it joins and drops after being read. The 910 works.",
        "source": {
          "url": "https://www.zigbee2mqtt.io/devices/99100-045.html",
          "verifiedAt": "2026-09-04"
        }
      },
      {
        "id": "ge-enbrighten",
        "name": "GE and Enbrighten",
        "devices": "In-wall switches and dimmers, plug-in switches and dimmers, outlets (made by Jasco)",
        "matchVendors": [
          "GE",
          "Jasco",
          "Jasco Products",
          "Enbrighten"
        ],
        "fresh": "New switch or plug, never on a hub? Just power it while this is open: it shows up under Joining now by itself, nothing to press. The gesture below is only for one that was on another hub.",
        "reset": [
          "In-wall switch (45856) and Enbrighten paddles (43xxx): press the top of the paddle ten times quickly.",
          "In-wall dimmer (45857): pull out the air gap at the bottom, hold the top paddle, push the air gap back in, release the paddle after 4 seconds.",
          "Plug-in switch or dimmer (45853, ZB4101, 45852): unplug it, hold its button, plug it in while holding, and let go at once. Held more than 4 seconds after plugging in, it does not reset and stays on its old network."
        ],
        "pair": [
          "The reset is the pairing: the LED blinks blue while it looks for a network.",
          "Do it while the network is open. The device appears below within a minute."
        ],
        "note": "A device that is on another hub has to be reset the same way first.",
        "source": {
          "url": "https://byjasco.com/pages/zigbee-faq",
          "verifiedAt": "2026-09-04"
        }
      }
    ]
  },
  "builtIn": {
    "reason": "its Zigbee radio"
  },
  "disconnect": {
    "consequence": "{count} {things} are forgotten and have to be paired again; the radio stays."
  },
  "author": {
    "kind": "alyt",
    "name": "ALYT",
    "url": "https://alyt.com"
  },
  "verification": {
    "level": "proven",
    "at": "2026-09-05T02:00:00.000Z"
  }
}